CAKEWALK sonar x3, Справочное руководство

Страница: 331 / 2094

331
Arranging tracks
Arranging and editing
See:
“Changing the order of tracks” on page 331
“Configuring the display of tracks in the Track view” on page 334
“Inserting tracks” on page 333
“Copying tracks” on page 336
“Erasing tracks” on page 337
Changing the order of tracks
There are several ways you can change the order of tracks in the Track view:
• Drag a track to a new position in the Track view.
• Use the Track view
Tracks > Sort Tracks command to rearrange the tracks in order based on the
track name, status, or other setting.
To do this Do this
Select a track Click the track number in the Track view. The track is selected, and all
other tracks—except the current track—are deselected.
When a track is selected, both the track number and all the data in the
track appear highlighted.
Select several adjacent tracks Click the track number for the first track in the group, drag the mouse to
the last track number in the group, and release the mouse button.
Select/deselect all tracks Double-click a track number.
Add or remove a single track from
the selection Hold the SHIFT key and click the track number to add it to the selection;
hold the CTRL key and click the track number to toggle its selection
status.
Select all buses that a track is routed
to (via output or sends). Hold down the ALT key and click the track number.
Table 41.
Note: Track selection gestures also apply to buses. For details, see “Bus selection” on page
893.