CAKEWALK sonar x3, Справочное руководство

Страница: 1057 / 2094

1057
Melodyne (Producer and Studio only)
Using Region FX
To correct timing automatically by macro
1. Select the region or clip you want to edit.
2. Convert the selection to a Melodyne Region FX clip. For details, see “To create a Melodyne
Region FX clip” on page 1050.
3. On Melodyne’s View menu, select Show Intended Notes . The Melodyne editing area now
shows the actual starting position of each note, along with a gray frame that indicates the
intended starting position.
4. In Melodyne, select the notes you wish to edit. If no notes are selected, all notes will be edited.
5. Click the Quantize Time button to open the macro controls.
6. Under Select Groove Reference , select the note duration that will govern the time correction.
7. Adjust the Intensity slider to apply a degree of correction ranging from 0% (no correction) and
100% to end up precisely on the beat.
8. Click OK when you are satisfied with the results.
After using the Quantize Time macro, you can fine-tune notes further with the Main tool , if
desired.
For details about using the Melodyne editor, consult the Melodyne
Help menu.
Note: When adjusting notes with the macro controls, Melodyne will ignore any notes you have
manually edited with the Main tool . If you also wish to edit these notes, select the Include
notes already edited manually check box.