CAKEWALK Sonar V-STUDIO 100 страница 13 Скачать руководство пользователя

Страница: 13 / 60

Installation and Registration

Wait until the lower right of the screen indicates “Found New Hardware” and the “Found New

Hardware Wizard” appears.

* It may take some time for the

“Found New Hardware Wizard”

to appear.

If you are asked whether you want to connect to Windows Update, choose “No” and then click

[Next].

Choose “Install the software automatically (Recommended)” and click [Next].

If the “Hardware Installation” dialog box appears, click [Continue Anyway] to proceed with the

installation.

* If you cannot proceed with the installation, click [OK] to cancel the installation, and then refer to

“Driver Signing

Options setting.”

10.

If the “Completing the Found New Hardware Wizard” appears, Click [Finish].

11.

When the “Installation has been completed.” message appears, installation has been completed.

Click [Close] to close the

“Driver Setup”

dialog box.

12.

If the “System Setting Change” dialog box appears, click [Yes] to restart Windows.

If the installation was not completed successfully, disconnect the USB cable from the SONAR V-STUDIO 100

hardware, and uninstall the driver by executing

“Uninstall”

, found in the same folder as the driver setup. Then

install the driver once again, being careful to follow the instructions for the installation procedure.

VS-100_install_e.book 13 ページ２００９年３月９日　月曜日　午後８時５６分

Содержание Sonar V-STUDIO 100





























































Результаты поиска

Содержание Sonar V-STUDIO 100

Отзывы:

Похожие инструкции для Sonar V-STUDIO 100

Бренды по названию

Популярные бренды

CAKEWALK Sonar V-STUDIO 100, Руководство по началу работы

Результаты поиска

Содержание Sonar V-STUDIO 100

Отзывы:

Похожие инструкции для Sonar V-STUDIO 100

Бренды по названию

Популярные бренды