Control panel operating instructions
It is not necessary to pre-heat this unit.
Setting the Temperature:
Push ON button.
•
Push TEMP button; LED display
•
will blink.
Set temperature using
•
Push TEMP to hold preferred temperature.
•
Note: Heating will not begin until timer is set.
Setting the Timer:
Push TIME button; LED display for hours
•
will blink.
Set the hours by using
•
Push TIME button again to lock in hours. The minutes LED will start blinking.
•
Set the minutes by using
•
Push TIME for timer to begin.
•
HEAT WILL TURN OFF WHEN TIME HAS EXPIRED.
Resetting control panel
If control panel shows an error message, turn electric smoker off, unplug unit from
outlet, wait ten seconds, plug unit back into outlet, then turn electric smoker on.
This will reset control panel.
24-Hour Pop-Up Digital Display
The display panel can be exposed by firmly
pressing the button located in front of display
panel. Display panel will open and rotate up-
wards.
Содержание Electric Smoker
Страница 35: ......