For large quantity of ICs, we recommend you process the half part on
all ICs together first, then switch to do the other half again.
16bit FLASH operation on the PROM8908D/E/F
For 16bit flash devices with ability of BYTE configurable, the
PROM8908 always handle it in the BYTE mode. For devices only have
the WORD configuration, it's impossible to handle on this machine.
16bit EPROM/FLASH operation on the PROM9801
The upper 48pin textools are used to handle all 16bit EPROMs and
16bit word-configurable-only devices. When these names were selected,
a "T48" or "Use Adapter In T48" message will shown on the LCD to
indicate it.
M29/Am29F002T/NT/B/NB Operation
These chips only has seven sectors available. The value of bit 7(msb)
in the Protect-Setting-Byte(PSB) is irrelevant, only the lower seven bits
are used for setting/verifying the IC's sector protection status.
The master IC's protection status will not be used for any purpose.
Instead, the PSB was used in the COPY and VERIFY command.
After the regular verify on the memory array was completed, all the
slave IC's protecting status will be compared with the PSB settings. A
slave IC will be acknowledged as good only both comparing of the array
and the PSB were passed. If the error LED lights at the last moment
during verify, it mostly can say that the protection status is only the
difference.
Am29F040 Operation
11
