background image

CAISSON ELEKTRONIK GmbH 

Boschstrasse 16, D-47533 Kleve, Deutschland

T: +49 (0) 2821-894390

[email protected]   www.caisson-gmbh.de

Instrument care

•  Protect the instrument from impact. Do not drop it or subject it to rough handling. Transport it in 

the supplied carrying case.

•  Never mix fresh and partially-used batteries.

•  Do not attempt to remove the mesh cover from the microphone as this will cause damage and aff ect 

the accuracy of the instrument.

•  Protect the instrument from water, dust, extreme temperatures, high humidity and direct sunlight 

during storage and use.

•  For long-term storage, remove the batteries. Do not leave exhausted batteries in the instrument, as 

they may leak and cause damage.

•  If the instrument casing becomes dirty, then wipe it with a lightly dampened cloth. Do not use abra-

sive cleansers and solvents. Do not allow moisture to enter the microphone, connectors or casing.

Power supply

The  SL200  is  powered  by  two  AA  batteries.  You  may  use  either  disposable  or  rechargeable  batte-

ries. The  Battery  status  indicates  the  battery  charge  level.  If  an  empty  battery  icon  is  displayed,  repla-

ce  the  batteries.  Batteries  should  be  replaced  with  a  new  set  of  batteries  of  the  same  kind.  Do  not  use

a rechargeable battery in combination with a disposable battery or a partially discharged battery with a full 

battery.

The fi gure below shows the location of the batteries in the battery compartment.

Содержание SL-200









Отзывы: