Note
: If bars „---”, like these „---” show up, they can indicate that the thermistor is not connected, or
is damaged, or that the temperature range is excessive.
Pressing the function key will cause sequential switching between the individual measured
values. The value of the measured parameter is shown enlarged on the screen; in this way one
can highlight the variable of interest. Other parameters are sequentially shown in this operating
mode the bottom of the screen in „the infobar”. Press the function key again to have other values
highlighted.
Press of the function key six times repeatedly to activate the menu. Here the language setting,
temperature unit, automatic switching off and the infobar can be changed.
The following options can be selected:
o
Language
[English,
Deutsch]
o
Temperature units
[°C, °F]
1.
Automatic switching off [ Off, 3Min., 5Min., 10Min.] – determines the lenght of downtime,
after which switch off automatically. Downtime is the period during which the function key
is not pressed. If the automatic switch off function is adjusted to „off”, the equipment can
only be switched off manually.
CAISSON Elektronik GmbH
Boschstrasse 16, D-47533 Kleve, Deutschland
tel: +49(0)2821-894390
www.caisson-gmbh.de
