p. 6
/
15
User Instruction
CAIROX
rev1
–
28/01/2022
Fig. 4. Mounting example CVA MPX
/ESKM…
*- External control signal
(0…10VDC)
is used in CVA MPX type heater.
**- External PWM control signal ON/OFF: ON
(6…24VDC)
is used in CVA ESKM type heater.
Fig. 4
Fig. 5. Mounting example CVA MPI
/NI…2NTC…
*- Temperature set point knob and TR NTC10 are used in CVA MPI 2NTC heater version.
**- TR5K NTC10 is used in CVA MPE 2NTC heater version.
Fig. 5
Fig. 6. Mounting example CVA MPI
/NI…
(Preheater)
**- TR5K used only in CVA MPE pre-heater version.
*- Temperature set point knob used only in CVA MPI pre-heater
version.
Fig. 6
AHU
–
Air handling uni
