CAIRE Hi Flow Stroller, Техническое и сервисное руководство

Страница: 13 / 38

Hi Flow Stroller Technical Service Manual • PN 14314465 Rev F
12
H
i F
lo
w S
tr
oller
Unpacking and Setup
VII
Unpacking
1. Inspect the carton for shipping damage. Report any damage to
the freight company before signing the bill of lading.
2. Check the description on the carton against your order.
3. Unpack the unit, including the Patient Operating Instructions
(POI).
4. Set aside the packing material in case the unit must be re-
turned to the factory.
Setup
If desired, the flow control knob (Item 20) can be adjusted so it will
not exceed the maximum prescribed flow rate.
1. To remove the flow control knob, firmly grip and pull straight
up away from the portable.
2. Remove the flow rate decal number disc (Item 21).
3. Remove the 2 Phillips head screws (Item 22) from the flow
lock plate (Item 26) and remove the plate.
4. Remove the locking pin (Item 23) from its storage position on
the flow lock plate and place in the underside of the hole cor-
responding to the maximum allowable flow rate.
5. Replace the flow lock plate (Item 26) and tighten screws (Item
22). Replace number disk (Item 21) and push-on knob (Item
20). Verify the flow lock is at the correct position.
FIGURE 5: Flow Control Knob
Refer to Patient Operating Instrucions (POI) Manual.
VIII
Operation