Page 4
Settings Menu
In the Settings Menu, you can customise the Notifier to your personal preferences via the icons on the screen. Each option is
explained below.
Screen
The brightness of the display and the option to flash the screen when an alert occurs can be found within this setting.
The Brightness option has 5 settings from 1 (dimmest) to 5 (brightest). Note that the brighter the display, the more it will
impact on battery life.
If the Strobe option is enabled, the screen will flash when the Notifier alerts. The Strobe can be enabled/disabled by pressing
the button (white button = strobe disabled, orange button = strobe enabled).
Note: If the Strobe option is switched on, the alert tone will change.
Away
Note: This option will only appear if Away is switched on when enabling Divert mode in the Radio menu, see page 7.
The Away option is designed to be used by a carer when they are using Divert but will be away from the Notifier for a period of
time. If Away is enabled and an alert is raised, the Divert Delay will be ignored and an alert will be diverted within a few
seconds. The carer can easily enable the away option when they leave, and disable it when they return.
Away can be enabled/disabled by pressing the button (white button = away disabled, orange button = away enabled).
Sound
The ringing volume, the ascending volume and vibration alert can be adjusted within this menu.
The Volume ranges from 0 (silent) to 3 (loud). Note: Sensors which are set to use tones 5 and 6 cannot be silenced.
The Ascend option can be enabled/disabled by pressing the button (white button = ascend disabled, orange button = ascend
enabled).
Note: An alert will start at volume 1 if Ascend is enabled.
The Vibrate option can be enabled/disabled by pressing the button (white button = vibrate disabled, orange button = vibrate
enabled).
Time
The time is shown on the front screen. It is important to set it for accurate event reporting and also when using the Day Mode
function. Tap each icon and use the up/down arrows and Exit button to set the Hours and Minutes.
Note: The Notifier does not have daylight savings capability so the time should be manually adjusted when the clocks change.
Date
The date is shown on the front screen. It is important to set it for accurate event reporting. Tap each icon and use the up/down
arrows and Exit
button to set the Day, Month and Year.
Alarm Clock
The Notifier can be used as an alarm clock. Tap the On/Off button to enable/disable the alarm clock (white button = alarm
clock disabled, orange button = alarm clock enabled), and use the up/down arrows and Exit button to set the Hours and
Minutes. When enabled, the Alarm Clock details can be viewed on the home screen.
Admin
This button will open up a Qwerty keyboard (see below). The Admin Menu (see page 5) will be accessed if the correct PIN is
entered.
Qwerty Keyboard
A unique feature of the Notifier is the requirement to enter a PIN, ensuring that unauthorised users cannot gain access to
critical settings. To access the Admin Menu, enter the correct PIN followed by Ent. A stylus should be used to ensure precise
input.
The default PIN is 1234, this can be changed within the Admin Menu. Abbreviations for the function buttons are:
●
ESC - Escape
●
Ent - Enter
●
Sp - Space
●
Bs - Backspace
V 1.1
Programming
Guide
