background image

Programming 

Guide

Cair (UK) Ltd.

Hanson Lane, Halifax, West Yorkshire, HX1 4SD

T

: 01422 399 155   

E

[email protected]   

W

: www.we-cair.com

Specifications

 

Battery Replacement

Under normal usage, the battery should last around 9-12 
months. Two ‘Duracell CR2016 Lithium Coin Cell +50% Extra 
Life’ batteries should be used to ensure maximum battery 
life. 

To access the batteries, the supplied T6 screwdriver should 
be used to unscrew all four screws on the rear of the casing. 
When the rear casing has been removed, gently prise up the 
circuit board at each corner using the screwdriver, being 
careful not to damage the electronics.
The batteries can be eased out and removed using your 
fingernail or a suitable instrument. You will notice a plastic 
insulating strip separating the batteries from the circuit 
board components, please ensure the strip is kept in 
position. When the batteries have been removed, press and 
hold the button for around 10 seconds to discharge any 
residual power before inserting the new batteries. 

While ensuring the plastic insulating strip is kept in position, 
insert the two new batteries, one on top of the other with 
both ‘+’ sides facing away from the circuit board. Once the 
new batteries have been fitted, the LEDs will flash and the 
CairFall will enter transport mode.

Fit the circuit board back into the casing, ensuring it’s 
positioned the correct way round, then replace the rear cover 
and turn the screws until they’re firm, but not too tight.

Once finished, ensure the programmed settings are still 
correct and test the CairFall as normal. 

Packing for shipment

The equipment containing cells or batteries must be 
packed in strong rigid packaging and must be secured 
against movement within the outer packaging to prevent 
accidental activation. The sender’s name and return 
address must be clearly visible on the outer packaging.

Safety

Do not dismantle or alter the unit. Do not open the case, 
unless replacing battery. 

Disposal

All electronic waste should be disposed of in accordance 
with the latest legislation. 
It must be disposed of within the electrical and electronic 
waste stream and not be disposed of in the normal waste 
stream. Recycling electrical waste products help to 
conserve natural resources and prevent adverse effects on 
the environment.
Contact your supplier should you require more 
information.

V 1.0

Compatibility

Tunstall / TeleAlarm / Appello

Operating Frequency

869 MHz

Dimensions

H50mm x W40mm x D14mm

Replaceable Battery

2x CR2016 Coin Cell

Battery Life

9-12 Months

Auto Low Battery

Battery tested daily

Wearing Options

Wrist and neck worn

Wireless Range

300m line of sight

Waterproof

IP67 standard

Operating Temp.

-10°C to +55°C

Compliance

CE / RoHS 2 / RED

Warranty

24 months

Содержание CairFall







Отзывы: