Xiamen Caimore Communication Technology Co.,Ltd
2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009)
------------------------------------------------------------------------------
----------------------------------------
Tel:+86 592 5901215
web: en.caimore.com
60
60
network, it will send packet to data center from time to time
Option
：
None Function
introduction: don’t send packet
Option
：
Use Default Function introduction: use default 0xFE
Option
：
Self Define Function introduction: Customer define their own packet
according to actual situation
4.6.2 Battery Power Feature configure
This function is used to set the time of using battery supply when ACC power is cut
off.Using battery power supply is to achieve that when the ACC power is cut off,it can
continue to use battery power to make sure that the device can operate.
Battery backup time:
The power supply duration after ACC is cut off.
Note:
The battery supply voltage must be less than ACC power supply voltage
.
4.6.3 Activation Mode
Automatic modem
Device enters into auto dial-up status after power on. It is leaving-factory
default setting
Phone mode
Wake up by phone (the mobile number is SIM card number that is inserted
on gateway). Under this mode, gateway didn’t dial-up after power on, when there
is calling, gateway dial-up after checking the ringing
