厦 门 才 茂 通 信 科 技 有 限 公 司
Xiamen Cai
more
Communication Technology Co.,Ltd
Add: 3F, 1st Building, 23# Wanghai Road, Xiamen
Tel: +86-592-5902655
Web:
http://en.cai
more.
com
Fax:+86-592-5975885
17
Description of Basic Conf:
Name
Description
Notice
Main Server IP
Set it to main server’s IP address or domain name.
If there is no static IP for server, please
use domain name.
Main Server Port
Set it to main server’s port which is used to communicate with
DTU.
Sub Server IP
Set it to sub server’s IP address or domain name.
If there is no static IP for sub server,
please use domain name.
Sub Server Port
Set it to sub server’s port which is used to communicate with
DTU.
If there is no sub server, please set IP
and port as same as main server’s.
Baudrate
Baud rate.
Please set these parameters as same as
PLC’s.
Parity Bit
Parity bit.
Data Bit
Data bit.
Flow Control
Flow control.
Device ID
A eight hex number for server to identify different DTU.
Device ID is used in TCP mode.
Please make it sure that the number is
different from DTU to DTU.
Mobile Number
A eleven decimal number for server to identify different DTU.
Mobile number is used in UDP mode.
It is not necessarily to set mobile
number as same as SIM card number.
5.2 Center Server Conf
There are two modes to configure center server parameters, single server mode and multiple servers
mode.
5.2.1 Single Server Mode Configuration
Single server mode is configured with Main Server IP and Port,
Basic Conf
page,. The details can refer
to
Instruction of Basic Conf
.
5.2.2 Multiple Server Mode Configuration
Center Server Conf’s Interface: