7
Antenna Power
Each input port (
RF-IN1
to
RF-IN4
) is capable of supplying 12V, 100mA (max.) to an active
antenna. The user may choose to turn on/off the power on each input port based on the nature
of the antenna (passive or active) of user’s choice.
Add Channel
On below LCD display:
1.
RF-IN1
refers to the desired signal input port.
Ch14
refers to
input channel
.
14
refers to the
output
channel
.
77 dB
μV
refers to the input signal power
level (measured automatically by CAP 532).
2.
Use Up/Down to change channel number, use
Left/Right to choose Input/Output channel
3.
Press the Left button at
Input Channel
or press the
Right button at
Output Channel
to save settings and
go back to previous page
4.
To avoid signal overlapping,
Output Channel
number
cannot be duplicated.
Input channel Output channel
5. Maximum
output channel
numbers are 32
(RF-IN1 + RF-IN2 + RF-IN3 + RF-IN4 = Max 32)
NOTE: Due to automatic LTE filter selection capability of CAP 532, each input port can receive
VHF
or
UHF
band signal only. To program it, the user needs to choose an input port and
associate a channel to it, and CAP 532
will automatically lock to VHF/UHF band based on
the
command. In above case, the user has chosen Ch14, and that will lock RF-IN
1 to receive UHF
band signal only. By removing all the channels associated to a specific input port, the user can
reprogram the input port to receive VHF/UHF band again.
RF-IN1
Ch14 ->14 77
dB
μV
RF-IN1
Antenna Power
Antenna Power
Off
Antenna Power
On
