CAGSAN MERDIVEN EN131 Series, Руководство пользователя

Страница: 7 / 40

EN
7
Do not use the ladder as a bridge.
Ladder for
professional use
7.2 Additional requirements for safety marking and user instructions for leaning ladders
7.3 Additional requirements for safety marking and user instructions for standing ladders
•Do not modify the ladder design.
•Do not move a ladder while standing on it.
•For outdoor use caution to the wind.
•Ladder shall never be moved from the top.
If a ladder is delivered with stabili-
zer bars and these bars should be
fixed by the user before the first
use this shall be described on the
ladder and in the user instruction.
Leaning ladders with rungs shall
be used at the correct angle.
Do not step off the side of
standing ladder onto another
surface.
Use the ladder with restraint
devices engaged only.
Do not stand on the top two
steps/rungs of a standing ladder
without a platform and a
hand/knee rail.
Leaning ladders with steps
shall be used that the steps are
in a horizontal position.
Only use the ladder in the
direction as indicated, only if
necessary due to design of
ladder.
Do not stand on the top three
steps/rungs of a leaning
ladder. For telescopic ladders
the last metre shall not be
used.
Open the ladder fully before
use.
Standing ladders shall not be
used as a leaning ladder
unless it is designed to do so.
Any horizontal surface which
looks like a platform on a
standing ladder that is not
designed for standing on (e.g.
a plastic work tray) shall be
clearly indicated on that surfa-
ce, (only if necessary due to
design of ladder).
Ladders used for access to a
higher level shall be extended at
least 1 m above the landing point
and secured, if necessary.
Do not lean the ladder against
unsuitable surfaces