CAGSAN MERDIVEN EN131 Series, Руководство пользователя

Страница: 6 / 40

EN
6
Warning, fall from the ladder.
Refer to instruction
manual/booklet
Maximum total load
Do not overreach.
Maximum number of users
7. Safety information for using the ladder
7.1 Minimum basic requirements for safety marking and user instructions for all ladders
• Do not spend long periods on a ladder without regular breaks (tiredness is a risk).
• Prevent damage of the ladder when transporting e.g. by fastening and, ensure they are
suitably placed to prevent damage.
• Ensure the ladder is suitable for the task.
• Do not use the ladder if contaminated, e.g. with wet paint, mud, oil or snow.
• Do not use the ladder outside in adverse weather conditions, such as strong wind .
• For professional use a risk assessment shall be carried out respecting the legislation in the
country of use.
• When positioning the ladder take into account risk of collision with the ladder e.g. from
pedestrians, vehicles or doors. Secure doors (not fire exits) and windows where possible in the
work area.
Inspect the ladder after delivery.
Beforeevery use visually check
the ladder isnot damaged and is
safe to use. Do notuse a
damaged ladder.
Do not use the ladder on a unlev-
el or uniform base.
Do not erect ladder on contami-
nated ground.
Do not ascend or descend unless
you are facing the ladder.
Keep a secure grip on the ladder
when ascending and descending.
Maintain a handhold whilst working
from a ladder or take additional
safety precautions if you cannot.
Do not use the ladder if you are
not fit enough. Certain medical
conditions or medication,
alcohol or drug abuse could
make ladder use unsafe.
Do not carry equipment which
is heavyor difficult to handle
while using a ladder.
Avoid work that imposes a
sideways load on ladders, such as
side-on drilling through solid
materials.
Do not wear unsuitable footwear
when climbing a ladder.
Warning, electricity hazard Identify any electrical risks in the work area,
such as overhead lines or other exposed electrical equipment and do
not use the ladder where electrical risks occur.
Use non-conductive ladders for unavoidable live electrical work.