17
Clockwise stirring
Turn the stirrer on by pressing the power button . The display will read 40 rpm
and the speed indicator light will be illuminated . Increase to the desired speed and
press the start/pause button . The stirrer will start turning in a clockwise direction .
The speed indicator light in the display will flash and the set speed in rpm will be
displayed .
Counter Clockwise stirring
set up by following the clockwise stirring instructions above . Press the reverse
button . The reverse button can be pressed while the stirrer is running to start the
stirrer in a counter clockwise direction . The indicator light above the reversing
icon will be illuminated when the stirrer is turning in a counter clockwise direction .
Countdown Timer
Turn the stirrer on by pressing the power button . set the desired speed by pressing
the “+” button . Press the multifunction button until the indicator light for time is
illuminated . A “0” will appear in the display . Press the “+” to set the countdown
timer in minutes . Press the start/pause button to start . stirring will start . Time or
speed can be displayed . If time is selected, the minutes remaining are displayed .
Press the multifunction button to display speed . To stir in the opposite direction,
press the reverse button . stirring stops when time is completed . Three beeps will
sound .
xRx
Agitation Cycle
Turn the stirrer on by pressing the power button . set speed as above and
countdown timer if desired . Press the multifunction button once more until the
indicator light for cycle is illuminated . A “0” will appear in the display . Press the
“+” to set the number of seconds the impeller will rotate in one direction before
changing directions . Press the start/pause button .
For example: If set for 5 seconds the stirrer impeller will turn clockwise for 5
seconds at the set speed then stop and change to turn counter clockwise for 5
seconds . This mixing pattern will continue until the pause button is pressed or
until the time is completed (if set) .
The display will show the cycle seconds counting down during each direction
unless speed or the countdown timer is selected .
