Caffitaly System Milano, Инструкция

Страница: 14 / 20

14
Dispensing Milk
• Fill the jug with the desired amount of milk.
• Position the milk jug lid.
• Make sure the milk jug lever is in the dispensing position (Fig. 10).
• Fit the milk jug in its place (Fig. 5). Buttons
D-E-F blink. Wait until they light up and stay
steadily lit.
• Place a cup under the milk dispenser (Fig. 8).
• Press button
F .
• The pressed button will blink. Dispensing stops when the programmed amount is reached.
Note : For better results, use milk at temperature approx. 4°- 8°C. If the jug is
removed and put in the fridge, it is advisable not to keep the milk for more than two
days. Do the "Milk jug cleaning cycle" (see the relevant section) after every
dispensing of a beverage with milk.
Programming the Amount of Milk in a Cup
• Fill the jug with the desired amount of milk.
• Position the milk jug lid.
• Make sure the milk jug lever is in the dispensing position (Fig. 10).
• Fit the milk jug in its place (Fig. 5). Buttons
D-E-F blink. Wait until they light up and stay
steadily lit.
• Press and hold down button D , E or F , depending on the desired beverage with milk.
• On reaching the desired amount of milk, release the button. The button is now programmed.
• If button
D or E is pressed, the machine will automatically dispense the coffee once
released.
Milk Jug Cleaning Cycle
After each dispensing beverages with milk, it is advisable to do a cleaning cycle before
removing the jug and putting it in the fridge.
• Place a container under the milk dispenser.
• To do the cleaning cycle, turn the milk jug lever anticlockwise to the right (Fig. 11).
•
Do not interrupt the cleaning cycle. At the end a beep sounds.
• Turn the milk jug lever to the dispensing position (Fig. 10) and remove the jug (Fig. 6).
Note : If the jug is removed and put in the fridge, it is advisable not to keep the milk
for more than two days.
English