Cafe QuietBoost Blower CVW9304 Скачать руководство пользователя страница 6

Страница: 6 / 57

49-2000706 Rev. 4

Controls

USING THE HOOD:

Controls / Chef Connect

Chef Connect Operation Bluetooth

Connection

To pair with another device:

To start the pairing process on the hood, press and hold
the

Light

button for 3 seconds. The backlight for all the

icons will flash until the hood is paired with the range or
other device. If the pairing is successful, the backlights of
all buttons will flash simultaneously three times and then
turn off. The hood lights and fan default sync setting will
be activated.

It will time out after 2 minutes if the pairing is not
completed, after which the pairing sequence will need to
be restarted.

To cancel pairing:

To cancel the pairing, hold the

Light

button down for 3

seconds and then turn off the hood.

Default Sync Settings:

The factory default setting for the light will be the brightest.

The factory default setting for the fan sync will be OFF.

The user can change the Default Sync Settings by
pressing and holding the

Med

button for 3 seconds.

This will enter the Default Settings Mode. Once in
this mode, the backlights for all buttons will blink on/
off indefinitely and the fan and light will switch to the
current Default Sync Setting, so the user knows what the
current default value is. At this time, set the light and fan
to the desired default levels. Once the user is satisfied
with the selection, press and hold the

Power

button

for 3 seconds. This will exit this mode. At that time the
backlights will stop blinking and the state of the fan and
light will change back to their prior state before entering
the Default Settings Mode.

Chef Connect

1. Rangehood

Control

Panel:

The control panel

is located under the front edge of the canopy. The
position and function of each control button are
noted below.

2. Fan

On/Off:

On/Off switch for the fan. The fan

can be operated by pressing any of the fan setting
buttons. Hold

Power

for 3 seconds to activate Delay

Off feature, which automatically turns the fan off after
15 minutes. Low, Med and High buttons LEDs will
rolling blink to indicate Delay Off feature is activated.

3. Fan

Settings:

Speed control for fan. Fan

speed is powered by

QuietBoost™ Technology.

This unique technology is designed to minimize
ventilation noise and enhance motor efficiency for a
peacefully-quiet, odor-free kitchen. Press the button

Low

for LOW speed,

Med

for MEDIUM speed, and

High

for HIGH speed. Hold down the High button

for 3 seconds to activate the Boost speed that will
run for 15 minutes. High button LED will blink on/off
to indicate Boost feature is activated.

4. Light:

Off/On/Night Light switch for the LED lights.

Press the

Light

button to turn the lights on, again to

set the lights to night light setting, and again to turn
the lights off.

5. Chef Connect:

This is a Bluetooth

pairing feature

for use with other compatible Chef Connect enabled
products on a cooktop or range. When the device is
paired, the default sync settings will be activated upon
receiving a command from the range or cooktop. To
change the default sync setting, refer to the Chef
Connect section.

To pair devices, hold down the

Light

button for 3

seconds. To turn it back off, hold the button down for
another 3 seconds. See the Chef Connect section for
more details.

6. IR Sensor:

Remote control receiver when used

with remote control kit.

7. Wi-Fi:

Hold down the Low button for 3 seconds

to initiate the Wi-Fi connection. The Wi-Fi indicator
light turns on when connected, see the Wi-Fi
Connect section for details.

2ႇ

Low