Document type:
Title:
Revision date:
Revision:
User's Manual (MUT)
Mod. A1733-A1833-A1733B-A1833B HV Boards
15/01/2010
9
NPO:
Filename:
Number of pages:
Page:
00101/00:17XXx.MUTx/09 A1733B-A1833B_REV9.DOC
17
11
2.4 Technical
Specifications
2.4.1 Packaging
The Mod. A 1733 – A 1833 modules are housed in a 5 TE-wide, 6U-high mechanics. The
Mod. A 1733B – A 1833B modules are housed in a 10 TE-wide, 6U-high mechanics.
2.4.2 External
connections
The location of all components of the front panel is shown in Fig. 2.1, p. 8. The function
and electro-mechanical specifications of the external connectors are listed in the
following subsections.
CH 0..11 (A 1733 – A 1833):
Mechanical specifications:
HV coaxial connectors
Radiall SHVR317580-type
Electrical specifications
: high voltage output
according to specifications given in Table
2.1, p.9.
CH 0..27 (A 1733B – A 1833B):
Mechanical specifications:
Multipin connector Radiall 691803004-type,
52 pin male (to be mated with Radiall
691802002-type
5
[
SCEM 09.41.34.700.2
]);
see Fig. 2.2 for pin assignment.
Electrical specifications
: high voltage output
according to specifications given in Table
2.1, p.9.
HV EN CONNECTOR
Mechanical specifications
:
00-type LEMO connector.
Electrical specifications:
board ENABLE
input, if connected to ground, the channels
are enabled. Refer to § 4.2, p.16 for further
details.
5
Requires 52 pins Radiall 691804300 [
SCEM 09.41.33.830.7
]
type, to be installed using the insertion/extraction
tool Radiall 282549024 [
SCEM 34.95.17.125.3
] type.
