manualshive.com logo in svg

Caen N568 B, Техническое руководство, Страница: 17 / 37

Поделиться
Скачать
Caen N568 B Скачать руководство пользователя страница 17

  

 

 

 

 

 

 

 

 

Document type: 

Title: 

Revision date: 

Revision: 

User's Manual (MUT) 

Mod. N568B/LC 16 Ch Spectroscopy Amplifiers 

26/01/2007 

4 

 
 
 

 

Filename: 

Number of pages: 

Page: 

 N568B_N568LC_REV4.DOC 

37 

17 

 

AA Ch** Fg   NNN 

N568    Cg     M

 

 
where AA is still the selected address number. The address number starts blinking, indicating the 
currently modifiable field. By pressing the key "#", the blinking can be moved on the Ch (Channel 
Number) field: by pressing "ROLL" it is possible to increment the value of the Channel Number by 1 
(Channel values: 0 to 15). This number indicates the Channel on which all following settings are 
performed. By pressing the key "#" the blinking toggles to the Fg (Fine Gain) field in the display (NNN 
in the figure above): by pressing "0" or "1" it is possible respectively to decrement/increment the value 
of the Fine Gain by 1, while by pressing "4" or "7" it is possible respectively  to decrement/increment 
the value of the Fine Gain by 10 (allowed Fine Gain values: 0 to 255). By pressing the key "#" the 
blinking toggles to the Cg (Coarse Gain) field in the display (M in the figure above): by pressing 
"ROLL" it is possible to increment the value of the Coarse Gain by 1 (allowed Coarse Gain values: 0 
to 7). 
 
By pressing the "PAGE" key, the display will appear as follows: 
 

AA Ch** PZ   NNN 

N568    Sh     L

 

 
 
where AA is the selected address number. By pressing the key "#" the blinking toggles from the 
position of the blinking field in the previous page to the following at its right. By pressing the key "#", 
the blinking can be moved on the Ch (Channel Number) field: by pressing "ROLL" it is possible to 
increment the value of the Channel Number by 1 (Channel values: 0 to 15). This number indicates the 
Channel on which all following settings are performed. By pressing the key "#" the blinking toggles to 
the PZ (Pole Zero adjustment) field in the display (NNN in the figure above): by pressing "0" or "1" it is 
possible respectively to decrement/increment the value of the Pole Zero adj. by 1, while by pressing 
"4" or "7" it is possible respectively to decrement/increment the value of the Pole Zero adj. by 10 
(allowed Pole Zero adj. values: 0 to 255). By pressing the key "#" the blinking toggles to the Sh 
(Shaping Time) field in the display (L in the figure above): by pressing "ROLL" it is possible to 
increment the value of the Shaping Time by 1 (allowed Shaping Time values: 0 to 3). 
 
By pressing the "PAGE" key, the display will appear as follows: 
 

AA Ch** Out Pos 

N568    Out NInv

 

 
 
where AA is the selected address number. By pressing the key "#" the blinking toggles from the 
position of the blinking field in the previous page to the following at its right. By pressing the key "#", 
the blinking can be moved on the Ch (Channel Number) field: by pressing "ROLL" it is possible to 
increment the value of the Channel Number by 1 (Channel values: 0 to 15). This number indicates the 
Channel on which all following settings are performed. By pressing the key "#" the blinking toggles to 
the higher row OUT (Output Polarity) field in the display (Pos in the figure above): by pressing "ROLL" 
it is possible to switch from Positive (Pos) to Negative (Neg) polarity. By pressing the key "#" the 
blinking toggles to the lower row OUT (Output configuration) field in the display (Ninv in the figure 
above): by pressing "ROLL" it is possible to switch from Non-inverting (Ninv) to Inverting (Inv) 
configuration. 
 
By pressing the "PAGE" key, the display will appear as follows: 

Содержание N568 B






































Отзывы:

Нет отзывов