Caen DT54 Series, Предварительный, Страница: 14 / 41

CAEN
Electronic Instrumentation
DT54xx USB High Voltage Power Supply
14
$CMD:MON,PAR:ISET<CR,LF>
Read out ISET value
$CMD:MON,PAR:VMON<CR,LF>
Read out VMON value
$CMD:MON,PAR:IMON<CR,LF>
Read out IMON value
$CMD:MON,PAR:RUP<CR,LF>
Read out RUP (RAMP UP) value
$CMD:MON,PAR:RDW<CR,LF>
Read out RDW (RAMP DOWN) value
$CMD:MON,PAR:PDWN<CR,LF>
Contains 'RAMP' or 'KILL'
$CMD:MON,PAR:IMRANGE<CR,LF>
Contains 'HIGH' or 'LOW'
$CMD:MON,PAR:TRIP<CR,LF>
Read out TRIP value
$CMD:MON,PAR:MAXV<CR,LF>
Read out Vmax hardware value
Vmax can be set via hardware.
$CMD:MON,PAR:IMAX<CR,LF>
Read out ISET maximum value
$CMD:MON,PAR:STAT<CR,LF>
Read out Status word
Bit 0 → ON 1 : ON 0 : OFF
Bit 1 → RUP 1 : Channel Ramping UP
Bit 2 → RDW 1 : Channel Ramping DOWN
Bit 3 → OVC 1 : Over current
Bit 4 → OVV 1 : Over voltage
Bit 5 → UNV 1 : Under voltage
Bit 6 → MAXV 1 : VOUT in MAXV protection
Bit 7 → TRIP 1 : Current generator
Bit 8 → OVP 1 : Over temperature
Bit 9 reserved
Bit 10 → DIS 1 : Ch disabled
Bit 11 → KILL 1 : Ch in KILL
Bit 12 → ILK 1 : Ch in INTERLOCK
Bit 13 → NOCAL 1 : Calibration Error
Bit 14, 15 → N.C. reserved
Set Commands
$CMD:SET,PAR:VSET,VAL:xxx.xx<CR,LF>
Set VSET value
$CMD:SET,PAR:ISET,VAL:xxx.xx<CR,LF>
Set ISET value