Caen 803 Series, Руководство пользователя

Страница: 12 / 29

CAEN
Electronic Instrumentation
803x Series 8-16 Ch. Programmable HV Power Supplies
12
Technical specifications table
1
Series 8031 8032 8033 8034 8034H
Polarity Positive / Negative / Mixed 2 depending on purchased version; common ground
Output connector BNC SHV
Output Voltage 0÷100 V 0÷500 V 0÷4 kV 0÷6 kV
Max. Output Current 10 mA 10mA 3 mA 1 mA 20 µA
Max. Output Power 1 W 5 W 6 W 0.12 W
Voltage Set Resolution 500µV 2mV 10mV 20mV
Voltage Monitor Resolution 500µV 2mV 10mV 20mV
ISet Resolution 50nA 10nA 5nA 100pA
IMon
Resolution
High range 50nA 10nA 5nA 100pA
Low range 5nA 1nA 500pA 10pA
Ramp Up/Down 1÷50 V/s, 1 V/s step 1÷100 V/s, 1 V/s step 1÷500 V/s, 1 V/s step
VMAX hardware 0÷100 V 0÷500 V 0÷4 kV 0÷6 kV
VMAX hardware resolution 1 V 2V
IMAX hardware 0÷10 mA 0÷3 mA 0÷1 mA 0÷20 µA
IMAX hardware resolution 10µA 1µA 20nA
Alarm output Open collector, 100 mA maximum sink current
Interlock input LOW: <1V; current~5mA; HIGH: 4÷6 V
Trip
Max. time an "overcurrent" can last (seconds). A channel in "overcurrent" works as a current generator;
output voltage varies to keep the output current lower than the programmed value. "Overcurrent" lasting
more than set value (1 to 9999) causes the channel to "trip". Output voltage will drop to zero either at the
Ramp-down rate or at the fastest available rate, depending on Power Down setting; in both cases the
channel is put in the off state. If trip= INFINITE, "overcurrent" lasts indefinitely. TRIP range: 0 ÷ 999.9s;
1000 s = Infinite. Step = 0.1 s
Voltage Ripple
10Hz ÷ 1kHz
Typ 3 mVpp 5 mVpp 4 mVpp
Max 5 mVpp 7 mVpp 8 mVpp
1kHz ÷ 20MHz
Typ 1 mVpp 3 mVpp 2 mVpp
Max 3 mVpp 5 mVpp 5 mVpp
Accuracy
Vmon vs. Vout ± 0.02% ± 20mV ± 0.02% ± 100mV ± 0.02% ± 1V
Vset Vs. Vout ± 0.02% ± 20mV ± 0.02% ± 100mV ± 0.02% ± 1V
Imon vs. Iout
High range ± 0.5% ± 50µA ± 0.2% ± 2µA ± 0.2% ± 1µA ± 0.2% ± 20nA
Low range ± 0.5% ± 5µA ± 0.2% ± 200nA ± 0.2% ± 100nA ± 0.2% ± 2nA
Iset vs. Iout
High range ± 0.5% ± 50µA ± 0.2% ± 2µA ± 0.2% ± 1µA ± 0.2% ± 20nA
Low range ± 0.5% ± 5µA ± 0.2% ± 200nA ± 0.2% ± 100nA ± 0.2% ± 2nA
Humidity range 0 ÷ 80% non condensing
Operating temperature 0 ÷ 45°C
Storage temperature -10 ÷ 70°C
Altitude ≤ 2000m a bove sea level
Vout / Temperature coeff. ±10 ppm/°C typ ±50 ppm/°C typ
Stability (24h; 1 hour warm up) ±0.01% / full scale ±0.02% / full scale ±0.01% / full scale ±0.01% / full scale
Long Term stability (1 week; 1h warmup) ±0.02% / full scale ±0.04% / full scale ±0.02% / full scale ±0.02% / full scale
Safety Standard – ROHS – Halogen free RoHS compliant
EMC qualification CEI EN 61326
1
Validity range of specifications: 8031: 1% to 100%; 8032: 5% to 100%; 8033: 1% to 100%; 8034, 8034H: 5% to 100%
2
Mixed boards have half of the channels with positive polarity and half with negative