Caen RFID skID, Техническое руководство

Страница: 76 / 105

HID PROFILE - skID Technical Information Manual 76
5 HID PROFILE
Introduction
Choosing the HID profile option you select the keyboard emulation protocol.
In the following table it is shown the compatibility between the HID profile and BT/BLE/USB connection for
different Operating Systems (Android, PC and iOS):
ANDROID devices WINDOWS PC iOS devices
BT BLE USB BT BLE USB BT BLE USB
HID
۷ ۷ ۷ ۷
Tab. 5.1: Compatibility table HID-BT/BLE/USB for different OS
By default the reader is in the easy2read profile and the BLE is activated.
Android devices
BLE and BT Communication Setup
Warning: By default the reader is in the easy2read profile and the BLE is activated.

If your reader is in the EASY2READ profile active, in order to set the HID profile, please
refer to § Profile paragraph page 36.

If your reader is in the USB communication interface active, follow the instructions given
in paragraph § Bluetooth and USB communication page 42 to select the Bluetooth
communication interface using the skID R1280I Configuration Tool and then the
instructions in chapter §
BT-BLE switching page 89 to switch the reader from BLE
(Bluetooth Low Energy) to BT (Bluetooth Classic) or vice-versa.

If your reader is in the BLE or BT communication interface active, follow the instructions
in chapter § BT-BLE switching page 89 to switch the reader from BLE (Bluetooth Low
Energy) to BT (Bluetooth Classic) or vice-versa.
Follow the steps below to connect your Android device to the skID reader using the BT or BLE connection.
All the images below were generated using a Samsung S7 model device.
1. On your Android device, go to Setting and enable the Bluetooth . A list of the Bluetooth available
devices is shown: