Caen RFID skID, Техническое руководство

Страница: 36 / 105

CONFIGURATION MENU - skID Technical Information Manual 36
RFID
Access the configuration menu as explained in the Introduction paragraph page 34.
Use this section in order to set the desired profile and then the related configuration options.
Profile
You can change the profile value using the drop-down menu:
The available profiles are:

EASY2READ (factory default) is the CAEN RFID easy2read communication protocol that permits
to control the reader using the CAEN RFID Easy Controller Application or the SDK (Software
Development Kit) library. For details on the use of the EASY2READ profile please refer to
§
EASY2READ PROFILE chapter page 45.
For details on the EASY2READ configuration options, refer to § EASY2READ Parameters page 38.

HID: choosing this option you select the keyboard emulation protocol.
For details on the use of the HID profile please refer to § HID PROFILE chapter page 76.
For details on the HID configuration options, refer to § HID Parameters page 39.
Warning: To save the changes click on the SAVE button (check the green dot on the bottom
right side of the sidebar). On the main application window click on File

Disconnect . Power off
the reader, disconnect the USB cable and then power on the reader, the new settings are
active.