- Lepton
7
- Technical Information Manual
7
2
TECHNICAL SPECIFICATIONS
Technical Specifications
Frequency Range
865.600÷867.600 MHz (ETSI EN 302 208 v3.3.1)
902÷928 MHz (FCC part 15.247)
RF Power
Configurable from 10 dBm to 30 dBm (from 10 mW to 1W) conducted
power
RX Sensitivity
-85dBm – 10%PER, assuming 20 dB antenna RL @ 30 dBm output
Antenna VSWR
Requirement
< 2:1 for optimum performances
Antenna Connectors
50 Ohm mono-static RF port on a single pin
Frequency Tolerance
±10ppm over the entire temperature range
Number of Channels
4 channels (compliant to ETSI EN 302 208 v3.3.1)
50 hopping channels (compliant to FCC part 15.247)
Standard Compliance
EPC C1G2 / ISO18000-63
I/O Interface
4 I/O lines 3.3V level
I
out
@ 8mA max
Connectivity
UART Serial Port
Baudrate: from 9.6 to 921.6 kbps, default 921.6 kbps
Databits: 8
Stopbits:1
Parity: none
Flow control: none
3.3 V I/O voltage level
Power Supply
4.75 ÷ 5.25 V DC
Power Consumption
-
1.4 A @ 5 V - RF out = 30 dBm
-
5 mA in idle mode - Ready to receive commands
Dimensions
(L) 32 x (W) 29 x (H) 4.1 mm
3
1.26 x 1.14 x 0.16 inches
3
Package Type
32 pin surface mount module (SMT compatible)
Operating Temperature
-20°C to +70°C
Weight
5.4 g
Tab. 2.1: Lepton
7
R7100C Technical Specifications
Y
Warning
: The RF settings must match the operating country/region to comply with local laws and
regulations.
The usage of the reader in different countries/regions from the one in which the device has been
sold is not allowed.
