Caen RFID Easy2log RT0005, Техническое руководство

Страница: 25 / 38

easy2log© RT0005 Technical Information Manual 25
BIN_SAMPLETIME registers (RW – 16 words)
Register Address Op. Default
BIN_SAMPLETIME_0 0x23 RW 0x0258
BIN_SAMPLETIME_1 0x24 RW 0x0000
... ... .. 0x0000
BIN_SAMPLETIME_15 0x32 RW 0x0000
These registers are used to define the sample interval to apply for the next acquisitions in the corresponding bin. The
value is expressed in seconds.
BIN_THRESHOLD registers (RW – 16 words)
Register Address Op. Default
BIN_THRESHOLD_0 0x33 RW 0x0000
BIN_THRESHOLD_1 0x34 RW 0x0000
... ... .. 0x0000
BIN_THRESHOLD_15 0x42 RW 0x0000
These registers represent the threshold value for the alarm (expressed in seconds) on the corresponding bin. If the bin
counter value is greater or equal than the threshold value the alarm bit for the corresponding bin is set.
MKT_ACTV_ENERGY registers (RW – 2 words)
Register Address Op. Default
MKT_ACTV_ENERGY_L 0x43 RW 0x0000
MKT_ACTV_ENERGY_H 0x44 RW 0x0000
The value, expressed in floating point 32bits (IEEE-754) notation, represents the Mean Kinetic activation energy and it
is expressed in J/mol. The map between the floating point fields and the two registers is reported below:
Sign Exponent Mantissa
31 30..23 22..16 15..0
MKT_ACTV_ENERGY_H MKT_ACTV_ENERGY_L
MKT_THRESHOLD_TEMP register (RW)
Register Address Op. Default
MKT_THRESHOLD_TEMP 0x45 RW 0x0000
This register provides the threshold temperature value for the alarm of the Mean Kinetic algorithm. If the Mean Kinetic
value is greater than the threshold value the alarm bit is set. The temperature in °C is expressed in fixed point 8.5
notation using the formula (3).
SHL_REF_TEMP register (RW)
Register Address Op. Default
SHL_REF_TEMP 0x46 RW 0x0000
Shelf life reference temperature expressed °C. The temperature in °C is expressed in fixed point 8.5 notation using the
formula (3).