REGUL8OR – User’s Manual
33
•
Size: 5 x 20 mm
•
Current rating:
2 A
•
Blow characteristic: Time delay
•
Breaking Capacity:
35 A
•
AC Voltage rating:
250 V
Figure 12
: AC Power Line input socket
AC Source Requirements
The REGUL8OR controllers are designed for universal AC input range since it
can operate with voltage from 90V to 240V and input frequency ranging of 50 Hz or
60 Hz. Installation Category shall be
CAT II
so maximum impulse voltage on the
network mains must be below 2500 V.
AC Input Cord
All the REGUL8OR digital controllers are directly shipped with the
corresponding power cord (suitable for the destination country of the purchase). Power
supply side connector is a standard IEC 60320 C19 plug. Current rating for the
connector is 2 A. Wire size for detachable power supply cord, not longer than 2 m, shall
be at least 0.75 mm
2
.
There is a potential shock hazard if the power supply chassis
is not connected to an electrical safety ground via the safety
ground in the AC input connector!
WARNING
