Caen ELS MAGNET F1K5-DISS-100-15, Руководство пользователя

Страница: 10 / 18

F1K5-DISS – User’s Manual
10
2. Installation
This chapter contains the main instructions for initial inspection and preparation
for use.
2.1 Preparation for Use
In order to put the system into operation, the power supply must be connected to
an appropriate AC source. The AC source voltage should be within the power supply
specification. Do not apply power before reading this manual.
Table 2 Error!
Reference source not found. lists the basic setup procedure. Follow the instructions in
the given sequence to prepare the power supply for use.
Step Checklist Description
1 Initial inspection Physical inspection of power supply
2 Mounting Installing the power supply, ensuring proper ventilation
3 F1K5-DISS Connections Connect the dissipation unit to main power converter
4 FAST-PS-1K5 Connections Connect the power supply to the AC source
5 First switch-on Switch-on checkout procedure
6 FAST-PS-1K5 Configuration Configure full current sink capability
Table 2: Installation checklist
2.2 Initial Inspection
Prior to shipment, this F1K5-DISS unit was inspected and found free of
mechanical or electrical defects. Upon unpacking of the power supply, inspect for any
damage which may have occurred in transit.
The inspection should confirm that there is no exterior damage to the power
supply such as broken switches or connectors and that all panels and display are not
scratched or cracked. Keep all packing material until the inspection has been completed.
If damage is detected, compile the RMA form available to the CAEN ELS web site.