Caen ELS CT-BOX, Быстрый старт

Страница: 7 / 16

CT-BOX Viewer – Quick Start Guide
7
Figure 3: (a) Popup menu for a new added CT-BOX. (b) More devices have been added.
Once added, a new popup menu is available for every single device. To go back at the
main window, click on the empty space of the screen.
As mentioned, it is also possible to add multiple CT-BOX units to the software
in order to control and configure them simultaneously via their corresponding popup
menu.
2.2 Device Popup Menu
The four icons in the popup menu shown in Figure 3(a) represent (starting from
the most left one):
•
START / STOP the data acquisition in the currently operation mode (Data-
Logger or Oscilloscope);
•
SETTINGS menu (see Sec. 2.2.1 for details);
•
FAULT status, it shows the status of the connected device and eventual faults
(see Sec. 2.2.1 for details);
•
CONNECT/DISCONNECT , it allows to start and stop the communication
with the connected unit (N.B. through this icon the CT-BOX is temporarily
disconnected, to definitely remove the device click on the red circle).
To go back at the main window, click on the empty space of the screen.
2.2.1 SETTINGS
GENERAL
In the GENERAL tab (see Figure 4 ) of the Settings window, the serial number of the
CT-BOX and the matched head (i.e. the DCCT head that must be used for the current
sensing) are shown, as well as the loaded
firmware version . At the bottom, three
editable text fields are present, referred to the name of the device , the system date (in
the format mm / dd / yyyy ) and the system time (in the format hh : mm : ss ), respectively.