CT-600/CT-1000 User’s Manual
17
2.4
Mounting
The current transducers can be mounted in different configurations, depending
on user’s needs and opportunities, but heatsink shall never be faced to the floor.
The transducers are designed to be used in rack-mount applications, by means of
any of the two (2) different 4-hole patterns placed in different sides of the mechanical
case.
Four holes are present on the bottom of the device as indicated in the
Figure 8:
bottom mounting holes pattern
Other four holes are present on the rear side of the plastic cover and can be used
in order to fix the device by means of self-threading screws. These holes are indicated
in
Figure 9:
rear mounting holes for self-threading screws
The self-threading screws can have a maximum length of 15 mm (2.9 mm
diameter) and the types that can be used are hereafter listed:
Mounting
Holes
Mounting
Holes
Fixing
Holes
