Page
3
of
5
Doc
G09 Rev 1
Date
27102020
It is strictly forbidden to
combine CAEM products
with non-CAEM
products.
Never used damaged
components. Installing
damaged products may
make the shelving
unsafe or expose sharp
edges. We recommend
ordering new ones.
Please contact our staff
to do so.
Loads must be
distributed uniformly
over the shelves.
It is forbidden to load
A deep deflection of the
Installing shelving
shelves over the limits
shelving may show a
without kicker panels
specified by CAEM. In
dangerous over-charge
helps collisions to the
case of overload, unload of the unit. It is
bases with possible
the products from the
recommended to
movements of
shelf and redistribute
immediately remove the bases and upright, loss
them uniformly.
weight, to make and
inspection to the
of alignment.
structure and to remove
the cause before
charging again.
It is strictly forbidden to
To avoid injuries and
It is strictly forbidden to
install shelves or
accidental impacts it is
modify or charge the
accessories on the rear
suggested to install
structure of the shelving
part of a wall unit or
shelves and accessories
or any of its parts. The
anywhere without
with a higher depth than changes will make the
a base.
the base shelf.
shelving structure
unsafe, with possible
collapse.
Brackets must be
properly inserted and
hooked into the upright
slots.
Shelves must be
properly placed on the
brackets.
It is strictly forbidden to
walk, hang with the
hands and lean against
the shelving. The CAEM
shelving is not designed
for this purpose and they
may cause a collapse.
It is forbidden to modify
the initial configuration,
either in the number or
in the distribution of
upper shelves, without
checking the loading
capacity tables.
DANGER! Not following the above rules may result in injuries to your
employees, customers or damage to your property and shelving.