Capital Automotive Equipment
Model:4PG8000
5.3 Synchronization adjustment
•
Repeat to lift and lower the lift several times, to ensure the tensile force and balance of4 steel cables. If
not, adjust the cable nut.
5.4 Loading test
To check whether hydraulic system works normally when loading heavy weight.
Notice:
•
Check every oil pipe and fitting, to ensure no leakage before operating the lift.
•
Remove or install any heavy part, one should use safety support like jack to keep the balance of vehicle.
•
-Cut off all the power when lift is not on work.
Notice
•
ATTENTION:
•
All bearings and hinges on this machine must be lubricated once a month
•
The lock latch, steel cable, and some other moving parts should be lubricated monthly.
•
The hydraulic oil must be replaced once a year. The oil level should always be kept at upper limit
position.
•
Check the steel cable every three months and if there is some abrasion, something wrong, stops using
and contact with the manufacturer.
•
Check the integration of the insurance system every day.
When change hydraulic oil, put machines to the lowest position, have the oil tank empty, when add new oil,
should be filled by filter.
