4
Mounting CAE Shifter
• Place the two bas
e Bars on the
threaded holes and screw on with
the supplied countersunk screws,
we recommend a small drop of
screw adhesive per screw.
> 90mm bar in front
> 80mm bar at the back
Pay attention to the correct
alignment of the base bars, see
picture
• Position the CAE shifter and
insert the shift cables into the
shifter housing; Immediately
insert the cables into the
respective bracket and fasten
by turning 90º. (cables do
not lock)
This works best if the shifter
is put to the right or left to
the side.
