3
•
Push the supplied
steel ball pans
onto the ropes and
tighten the grub
screws; here too
we recommend
using a small drop
of screw adhesive.
•
In neutral, at least
7mm
space must
remain on the ball
socket
"W"
to the
black sleeve
CHECK
:
Push the cable all the way in (Level 1/2)
Then there must be 1-2 mm space left to the sleeve
•
When sliding the ball sockets on, pay attention to the alignment so
that the cables do not have to be twisted later:
➢
Opening of the ball socket selector cable
"W"
points to the left
s
➢
Opening of the ball socket shifting cable
"S"
points upwards
