CAE SoundCam Series, Руководство по эксплуатации продукта, Страница: 23 / 48

Save measurement
Manual SoundCam 23
4.5 Save measurement
You can save the results of each completed measurement as a TDMS file (".tdms") for later use.
You can set the storage location in the settings menus (see The Settings Menu, p. 38); when you
select the storage location, you are always initially in this directory. By default, the SoundCam
root directory is set as the storage location. When using the PC application, this is your current
download directory.
Note that if you press the - button again, the data temporarily stored in the unit during
the previous measurement will be overwritten and cannot be recovered.
The storage location selection is displayed:
Tap the "Confirm" button to save the recording. You can call up the saved file via the main menu.
o
To do this, press the -button.
You can also find this in the start menu, where the recording appears in a list.
Figure 25: Saving measurement data
Change to the root directory
Create a new directory
Move up one level / into the parent
directory
File name - Tap to change
Select directory (with double click)
The address bar shows the current directory
Cancel / Confirm
Figure 26: Directory and file selection