CAE Healthcare Fidelis Lucina, Руководство пользователя

Страница: 351 / 390

Müse Parameter Descriptions
323
Vertex Rotation Type
The Vertex Rotation Type parameter is only relevant for the Vaginal Delivery operating mode. This
parameter specifies the desired sequence of cardinal movements as a sequence of target position for
vertex presentation:
initial position - internal rotation target - restitution target
The eleven possible choices include:
LOA - OA - LOT ; ROA - OA – ROT; LOT - OA – LOT; ROT - OA – ROT; LOP - OA – LOT; LOP
- OP – LOT; ROP - OA – ROT; ROP - OP – ROT; OP – OA; OA no rotation; and OP no
rotation
Exceptions : OP – OA has only an internal rotation to OA and no restitution. OA no rotation and OP no
rotation, have no spontaneous rotation.
Default : LOA-OA-LOT
Breech Initial Position
The Breech Initial Position parameter is relevant only for the Vaginal Delivery operating mode. This
parameter specifies the initial fetal position for breech presentation. There is no spontaneous rotation
with breech presentations. The eight possible choices are:
LSA, LSP, LST, RSA, RSP, RST, SA, SP
Default : LSA
Cord Prolapse
The Cord Prolapse parameter is only relevant for Vaginal Delivery, Active Phase, and Cesarean Section
operating modes. When activated ( Yes ), the umbilical cord should be configured in a prolapse
condition. This has no automatic effect and simply maps to the user instructions in the configuration
screen.
Default : No
Nuchal Cord
The Nuchal Cord parameter is only relevant for the Vaginal Delivery, and Cesarean Section operating
modes. When activated ( Yes ), the umbilical cord should be set in a nuchal cord condition. This has no
automatic effect and simply maps to the user instructions in the configuration screen.
Default : No