Cadman TRAVELLER 2250, Руководство оператора и каталог запасных частей, Страница: 13 / 56

11
2 Adjust the tongue jack for a level frame position during operation.
3 Release the turntable lock and rotate the upper frame to the desired operating position and
re-engage the turntable lock.
NOTE : 2250 model Cadman Travellers are equipped with flip down stabilizer legs. Both legs
must be used at all times.
A
WRONG
RIGHT
WRONG
CAUTION
The upper frame position MUST allow
the hose to be pulled out straight from
the machine. Adjust the upperframe po-
sition if necessary to insure proper un-
reeling of the hose.
CAUTION
Never operate the machine with only one (1) stabilizer leg extended
Lower BOTH stabilizer legs. Remove the leg
pin “A” (see illustration above) allowing the
drop leg to extend.
Replace the pin in one of the available holes so
that when the jack is extended, the drop leg
and extension leg will be of approximately
equal length. This will balance the side loading
of the jack and help to prevent damage caused
from over-extending one of the inner jack legs.
Repeat these steps for the other jack.