Cadillac XT4 Owner Manual (GMNA-Localizing-Europe-15440913) - 2022 -
CRC - 5/13/21
128
LIGHTING
To enable the IntelliBeam system,
press the button on the end of the
indicator lever when the exterior lamp
control is in the AUTO or
2
position.
Driving with IntelliBeam
The system only activates the main
beams when driving over 40 km/h
(25 mph).
The blue main-beam on light appears
on the instrument cluster when the
main beams are on.
There is a sensor near the top centre
of the windscreen that automatically
controls the system. Keep this area of
the windscreen clear of debris to allow
for best system performance.
The main beam headlamps remain on,
under the automatic control, until one
of the following situations occurs:
.
The system detects an approaching
vehicle's headlamps.
.
The system detects a preceding
vehicle's tail lamps.
.
The outside light is bright enough
that main beam headlamps are not
required.
.
The vehicle's speed drops below
20 km/h (12 mph).
.
The IntelliBeam system is disabled
by the button on the indicator
Lever. If this happens, press the
button on the end of the indicator
lever when the exterior lamp
control is in the AUTO or
2
position to reactivate the
IntelliBeam system. The instrument
cluster light will come on to
indicate the IntelliBeam is
reactivated.
The main beams may not turn off
automatically if the system cannot
detect another vehicle's lamps because
of any of the following:
.
The other vehicle's lamps are
missing, damaged, obstructed from
view, or otherwise undetected.
.
The other vehicle's lamps are
covered with dirt, snow, and/or road
spray.
.
The other vehicle's lamps cannot be
detected due to dense exhaust,
smoke, fog, snow, road spray, mist,
or other airborne obstructions.
.
The vehicle's windscreen is dirty,
cracked, or obstructed by something
that blocks the view of the light
sensor.
.
The vehicle is loaded such that the
front end points upward, causing
the light sensor to aim high and not
detect headlamps and tail lamps.
.
The vehicle is being driven on
winding or hilly roads.
The automatic main beam headlights
may need to be disabled if any of the
above conditions exist.
Exterior Lamps Off
Reminder
A warning chime sounds if the driver
door is opened while the ignition is off
and the exterior lamps are on.
Headlamp Main/
Dipped-Beam Changer
3
:
Push the indicator lever away
from you and release, to turn the
main beams on. To return to dipped
beams, push the stalk again or pull it
toward you and release.