Cadillac STS 2011, Руководство пользователя

Страница: 184 / 529

Black plate (77,1)
Cadillac STS Owner Manual - 2011
Driver Selection Submenu Items
DRIVER 1/DRIVER 2
The numbers on the back of each keyless access
transmitter correspond to DRIVER 1 and DRIVER 2.
If you would like to recall or store driver settings for the
driver that does not correspond to the number on the
back of the keyless access transmitter that you are
using:
1. Enter the memory programming mode for your
driver settings by following the instructions listed
previously under
“ Entering the Driver Selection
Submenu. ”
2. From the DRIVER SELECTION submenu, turn the
tune/select knob to highlight the driver number that
you want, either DRIVER 1 or DRIVER 2.
3. Set your choice by pressing in the tune/
select knob.
If you would like to recall or store driver settings for the
selected driver, see
“ RECALL DRIVER SETTINGS ” or
“ STORE DRIVER SETTINGS ” later in this section.
If you would like to recall or store exit settings for the
selected driver, see
“ RECALL EXIT SETTINGS ” or
“ STORE EXIT SETTINGS ” later in this section.
RECALL DRIVER SETTINGS
To recall driver settings:
1. Enter the memory programming mode for your
driver settings by following the instructions listed
previously under
“ Entering the Driver Selection
Submenu. ”
2. From the DRIVER SELECTION submenu, turn the
tune/select knob to scroll to RECALL DRIVER
SETTINGS and press in the knob.
If the vehicle is in P (Park), one beep will sound
and your previously saved driving position will then
be recalled.
If the vehicle is not in P (Park), three beeps will
sound and your previously saved driving position
will not be recalled.
A memory recall can be stopped by pressing any
memory seat or mirror position button.
If you would like the stored driving positions to be
recalled when unlocking your vehicle with the keyless
access transmitter or when starting your vehicle, see
“ REMOTE RECALL MEMORY ” or “ START BUTTON
RECALL ” under Vehicle Personalization on page 3 ‑ 59 .
3-77