E
S
C
A
L
A
D
E
E
X
T
Disable URPA
• Press the URPA on/off button (see
previous page) located near the
climate control system and radio. In
some circumstances, such as trailering,
the system can be disabled.
TIRE PRESSURE MONITOR
(if equipped)
The Tire Pressure Monitor alerts you
when a significant reduction in pressure
occurs in one or more of your vehicle’s
tires by illuminating the low tire
pressure warning light ( ) on the
instrument panel. The low tire pressure
warning light will remain on until you
correct the tire pressure.
You may also have a CHECK TIRE
PRESSURE message appear on the DIC
(if equipped).
Correcting the Tire Pressure
When the low tire pressure warning
light illuminates, you must fill the tire to
the proper tire inflation pressure. The
Tire and Loading Information label
shows the correct inflation pressure for
the tires when they’re cold. “Cold”
means your vehicle has been sitting for
at least three hours or driven no more
than one mile.
You can temporarily remove the DIC
message by acknowledging it with your
DIC controls. However, at the next
vehicle start-up, the DIC message will
reappear if the tire pressure has not
been corrected.
You may notice during cooler conditions
that the low tire pressure warning light
will appear when the vehicle is first
started and then turn off as you start to
drive the vehicle. This could be an early
indicator that your tire pressures are
getting low and need to be inflated to
the proper pressure.
CONTENT THEFT-DETERRENT
SYSTEM
Arm the System
• Lock the doors using the Remote
Keyless Entry transmitter. The alarm is
activated when the symbol ( ) goes
off (approximately 30 seconds).
Vehicle Personalization
MEMORY POSITIONS FOR DRIVER’S
SEAT, OUTSIDE REARVIEW
MIRRORS AND POWER
ADJUSTABLE
PEDALS
•
Adjust driver
seat, including
lumbar
adjustment and
side bolster.
•
Adjust gas and brake pedals.
•
Adjust the outside rearview mirrors.
•
To store the above settings, press
and hold Memory 1 or 2 (above)
until two chimes sound (about four
seconds). To set up for another
driver, repeat the process with the
other memory button.
These settings are recalled by pressing
the Memory 1 or 2 button on the
driver’s door
.
Set Easy Exit Driver Seat Position
1. Briefly press memory button
1 or 2.
2. Adjust the seat to the desired exit
position.
Note:
The Tire Pressure Monitor can alert you
about low tire pressure, but it doesn’t replace
normal monthly tire maintenance.
Note:
Your vehicle’s factory default setting is
Horn and Lamps. See the Vehicle
Personalization section of this booklet for
more information.
EscaladeEXT final 06.qxd 5/31/05 11:59 AM Page 12