3. Simultaneously
press and hold
both the
desired button
on the remote
and the hand-
held transmitter
button. Do not release the buttons
until Step 4 has been completed.
4. The indicator light will flash slowly at
first and then rapidly after the remote
successfully receives the frequency
signal from the hand-held transmitter.
Release both buttons.
5. Press and hold the newly trained
remote button and observe the
indicator light. If the indicator light
stays on constantly, programming is
complete and your device should
activate when the remote button
is pressed and released.
To program the remaining two Universal
Home Remote buttons, begin with Step
2. Do not repeat Step 1, as this will
erase all of the programmed channels.
STEERING WHEEL CONTROLS
(OnStar
®
/Radio)
• To activate Personal Calling, press this
button (“1” below). Pressing this
button also acts as a “barge in” for
voice mail.
•
PROG:
Sequence through stored
presets for AM, FM and XM Radio
(“2” above).
•
p
SOURCE
q
:
To select AM, FM1,
FM2, XM1, XM2 Satellite Radio,
cassette, CD, in-dash 6-Disc CD
Changer, RSE (“3” above).
•
p
SEEK
q
:
Seek radio stations, CD
tracks (“4” above).
•
p
VOL
q
:
Adjust Radio volume
(“5” above).
CRUISE CONTROL
Cruise control allows you to maintain
a constant speed of 25 mph or more
without keeping your foot on the
accelerator pedal.
Setting cruise control
1. Move the cruise control switch to
on ( ).
2. Attain the speed you want to
cruise at.
3. Press in the Set button (
)
at the end of the multifunction
lever on the left side of the
steering column.
4. Take your foot off the accelerator
pedal.
5. The cruise symbol on the
instrument cluster will illuminate.
E
S
C
A
L
A
D
E
E
X
T
Note:
If your transmitter has a “rolling code”
feature, the above process may not work. Please
refer to your Owner Manual.
1
2
3
4
5
EscaladeEXT final 06.qxd 5/31/05 11:59 AM Page 10