Cadillac Escalade Owner Manual (GMNA-Localising-Europe-11374166) -
2018 - crc - 7/14/17
SEATS AND RESTRAINTS
71
Folding and Tumbling the Second
Row Seat from the Cargo Area
1. Second Row Power Seat Fold
and Tumble Switches
2. Third Row Power Seat Fold
and Raise Switches
To fold and tumble the seat from the
cargo area:
1. Make sure that there is nothing
under, in front of, or on the seat.
2. Press the switch (1) on the side
trim of the cargo area to fold the
second row backrest.
The left switch folds the left
backrest, and the right switch
folds the right backrest.
3. Press the switch again to release
the rear of the seat from the
floor. The seat will tumble
forward.
The switches (2) can be used to fold
the third row backrests from the cargo
area. See
Returning the Seat to the Sitting
Position
{
Warning
If either seatback is not locked, it
could move forward in a sudden
stop or crash. That could cause
injury to the person sitting there.
Always push and pull on the
seatbacks to be sure they are
locked.
To return the seat to the sitting
position from the tumbled position:
1. Pull the seat down until it
latches to the floor. The seatback
cannot be raised if the seat is not
latched to the floor.
2. Lift the seatback and push it
rearward. Push and pull on the
backrest to make sure it is
locked.
3. For the 60/40 split-bench seat,
make sure the seat belt in the
centre seating position is not
caught between the two seats
and is not twisted.
Third Row Seats
Folding the Seat Backrest
Caution
Folding a rear seat with the seat
belts still fastened may cause
damage to the seat or the seat
belts. Always unfasten the seat
(Continued)