Cadillac CTS 2018, Руководство пользователя, Страница: 218 / 353

Cadillac CTS/CTS-V Owner Manual (GMNA-Localizing-Europe-11374014) -
2018 - crc - 9/14/17
DRIVING AND OPERATING 217
braking is active, the brake lamps will
come on. The automatic braking may
feel or sound different than if the
brakes were applied manually. This is
normal.
Stationary or Very Slow-Moving
Objects
{
Warning
ACC may not detect and react to
stopped or slow-moving vehicles
ahead of you. For example, the
system may not brake for a vehicle
it has never detected moving. This
can occur in stop-and-go traffic or
when a vehicle suddenly appears
due to a vehicle ahead changing
lanes. Your vehicle may not stop
and could cause a crash. Use
caution when using ACC. Your
complete attention is always
required while driving and you
should be ready to take action and
apply the brakes.
ACC Automatically Disengages
ACC may automatically disengage and
the driver will need to manually apply
the brakes to slow the vehicle if:
.
The sensors are blocked.
.
The Traction Control System (TCS)
or electronic stability control
system has activated or been
disabled.
.
The radar falsely reports blockage
when driving in a desert or remote
area with no other vehicles or
roadside objects. A DIC message
may display to indicate that ACC
is temporarily unavailable.
.
There is a fault in the system.
The ACC indicator will turn white
when ACC is no longer active.
Notification to Resume ACC
ACC will maintain a follow gap behind
a detected vehicle and slow your
vehicle to a stop behind that vehicle.
If the stopped vehicle ahead has
driven away and ACC has not
resumed, the vehicle ahead symbol
will flash as a reminder to check
traffic before proceeding. In addition,
the left and right sides of the Safety
Alert Seat will pulse three times,
or three beeps will sound. See
“ Alert
Type ” and “ Go Notifier ” in “ Collision/
Detection Systems ” under Vehicle
Personalisation 0 143 .
When the vehicle ahead drives away,
press +RES or the accelerator pedal to
resume ACC. If stopped for more than
two minutes or if the driver door is
opened and the driver seat belt is
unbuckled, the ACC automatically
applies the Electric Parking Brake to
hold the vehicle. The EPB status light
will turn on. See
Electric Parking Brake
0 200 . To release the EPB, depress the
accelerator pedal.
A DIC warning message may display
indicating to shift to P (Park) before
exiting the vehicle.
{
Warning
If ACC has stopped the vehicle, and
if ACC is disengaged, turned off,
or cancelled, the vehicle will no
(Continued)