Cadillac CT6 CUE Infotainment System (GMNA-Localising-Europe-
10293393) - 2017 - CRC - 6/21/16
VOICE RECOGNITION
71
3. Wait until after the beep
completes, then clearly speak
one of the commands described
in this section.
A voice recognition system
prompt can be interrupted while
it is playing by pressing
g
again.
For example, if the prompt seems
to be taking too long to finish,
press
g
again and the beep
should happen right away.
There are two voice prompt modes
supported:
.
Long verbal prompts: The longer
prompts provide more information
regarding the supported actions.
.
Short prompts: The short prompts
provide simple instructions about
what can be stated.
If a command is not spoken, the voice
recognition system says a help
prompt.
Prompts and Infotainment Displays
While a voice recognition session is
active, there will be corresponding
buttons on screens displayed. Manual
interaction in the voice recognition
session is permitted. Interaction
during a voice session may be
completed entirely using voice
commands, or some selections may
expedite a session. If a selection is
made using a manual control, the
dialogue will progress in the same way
as if the selection was made through a
voice command. Once the system is
able to complete the task, or the
session is terminated, the voice
recognition dialogue stops.
An example of this type of manual
intervention is touching an entry of a
displayed number list instead of
speaking the number associated with
the entry desired.
Cancelling Voice Recognition
.
Touch the Home screen button.
Touching this button will
terminate the voice recognition
session.
.
Touch or say
“
Cancel
”
or
“
Exit
”
to
terminate the voice recognition
session and display the screen
from which voice recognition was
initiated.
.
Press
i
on the steering wheel
controls to terminate the voice
session and display the screen
from which voice recognition was
initiated.
Most languages do not support
natural language commands in
sentence form. For those languages,
use direct commands like the
examples shown on the display.
Helpful Hints for Speaking
Commands
Voice recognition can understand
commands that are either naturally
stated in sentence form or direct
commands that state the application
and the task.
For best results:
.
Listen for the prompt and wait for
the beep before saying a command
or reply.
.
Say
“
Help
”
or look at the
infotainment display for example
commands.
.
A voice recognition system prompt
can be interrupted while it is
playing by pressing
g
again.