Cadillac CT4 Owner Manual (GMNA-Localizing-U.S./Canada-16500442) -
2023 - CRC - 5/4/22
42
Seats and Restraints
and a shared exit position. See
“
Saving Seating Positions
”
later in this section. The saved
positions can be recalled
manually by all drivers, see
“
Manually Recalling Seating
Positions
”
later in this section,
and drivers with remote keys
1 and 2 can also recall them
automatically. See
“
Auto Seat
Entry Memory Recall
”
or
“
Auto
Seat Exit Memory Recall
”
later
in this section. To enable
automatic recalls, turn on Seat
Entry Memory and/or Seat
Exit Memory. See
“
Enabling
Automatic Recalls
”
later in this
section. The memory recalls
may be cancelled at any time
during the recall. See
“
Cancel
Memory Seating Recalls
”
later
in this section.
Identifying Driver Number
The vehicle identifies the
current driver by their remote
key number 1
–
8. The current
remote key number may be
identified by Driver
Information Center (DIC)
welcome message,
“
You are
driver x for memory recalls.
”
This message is displayed the
first few times the vehicle is
turned on when a different
remote key is used. For Seat
Entry Memory to work
properly, save positions to the
1 or 2 memory button
matching the driver number of
this welcome message. To aid
in identifying remote key IDs, it
is recommended to only carry
one remote key when entering
the vehicle. Perform the
following if the welcome
message is not displayed:
1. Move all keys and remote
keys away from the
vehicle.
2. Start the vehicle with
another remote key. A DIC
welcome message should
display indicating the
driver number of the other
remote key. Turn the
vehicle off and remove the
other key or remote key
from the vehicle.
3. Start the vehicle with the
initial key or remote key.
The DIC welcome message
should display the driver
number of the initial
remote key.
Saving Seating Positions
Read these instructions
completely before saving
memory positions.
To save preferred driving
positions to 1 and 2:
1. Turn the vehicle on or to
accessory mode. A DIC
welcome message may
indicate the driver number
of the current remote key.
See
“
Identifying Driver
Number
”
previously in this
section.
2. Adjust all available memory
features to the desired
driving position.
3. Press and release SET; a
beep will sound.