Cadillac CRC 2021, Руководство пользователя

Страница: 162 / 355

Cadillac XT4 Owner Manual (GMNA-Localizing-MidEast-14584650) - 2021 -
CRC - 7/15/20
162 INFOTAINMENT SYSTEM
want directions to an address, ” “ I
need to find a Place of Interest or
(POI),
” or “ Find contact. ”
The system responds by requesting
more details. For other POIs, say the
name of a category like
“ Restaurants, ” “ Shopping Malls, ” or
“ Hospitals. ”
. Navigating to a destination outside
of the current country takes more
than one command. The first
command is to tell the system
where the navigation will take place,
such as an Address, Intersection,
POI, or Contact. If Address or
Intersection is selected, the second
command is to say,
“ Change
Country. ” Once the system responds,
say the country before saying the
rest of the address and/or
intersection.
If POI is asked for, say
“ Change
Location, ” then “ Change Country. ”
Direct commands might be more
clearly understood by the system. An
example of a direct command would
be
“ Call <number>. ” Examples of these
direct commands are displayed on
most of the screens while a voice
session is active. If “ Phone ” or “ Phone
Commands ” is spoken, the system
understands that a phone call is
requested and will respond with
questions until enough details are
gathered to make a call.
If a cell phone number has been saved
with a name and a place, the direct
command should include both, for
example
“ Call <name> at work. ”
Using Voice Recognition for List
Options
When a list is displayed, a voice
prompt will ask to confirm or select
an option from that list.
When a display contains a list, there
may be options that are available but
not displayed. The list on a voice
recognition screen functions the same
as a list on other displays. Scrolling or
flinging can be used to help display
other entries from the list.
Manually scrolling or paging the list
on a display during a voice
recognition session suspends the
current voice recognition event and
plays the prompt “ Please select
manually or touch the Back icon on
the infotainment display to try again.
”
If manual selection takes more than
15 seconds, the session terminates
and prompts that it has timed out.
The display returns to the display
where voice recognition was initiated.
The Back Command
Say “ Back ” or touch the Back icon on
the infotainment display to go to the
previous display.
If in voice recognition, and “ Back ” is
spoken all the way back to the
starting display, and then
“ Back ” is
spoken one more time, the voice
recognition session will cancel.
Help
Say “ Help ” on any voice recognition
display and the help prompt for the
display is played.
Touching
g
while the help prompt is
playing will terminate the prompt.
Doing this will stop the help prompt
so that a voice command can be used.