Black plate (51,1)
Cadillac ATS Owner Manual (GMNA-Localizing-MidEast-6335741) - 2014 -
CRC - 5/20/13
Driving and Operating
9-51
The speedometer reading can be
displayed in either English or metric
units. See
Instrument Cluster on
page 5-10
. The increment value
used depends on the units
displayed.
Reducing Speed While ACC is at a
Set Speed
If ACC is already activated, do one
of the following:
.
Use the brake to get to the
desired lower speed. Press
SET
–
down and release the
accelerator pedal. The vehicle
will now cruise at the lower
speed.
.
Press and hold SET
–
down until
the desired lower speed is
reached, then release it.
.
To decrease the vehicle speed in
smaller increments, press SET
−
down to the first detent. For
each press, the vehicle goes
about 1 km/h (1 mph) slower.
.
To decrease the vehicle speed in
larger increments, press SET
−
down to the second detent. For
each press, the vehicle speed
decreases to the next 5 km/h
(5 mph) mark on the
speedometer.
The speedometer reading can be
displayed in either English or metric
units. See
Instrument Cluster on
page 5-10
. The increment value
used depends on the units
displayed.
Selecting the Follow Distance
When a slower moving vehicle is
detected ahead within the selected
following gap, ACC will adjust the
vehicle's speed and attempt to
maintain the follow distance gap
selected.
Press
3
on the steering wheel to
adjust the following gap. Each press
cycles the gap button through three
settings: Far, Medium, or Near.
When pressed, the current gap
setting displays briefly on the
instrument cluster and HUD. The
gap setting will be maintained until it
is changed.