Black plate (7,1)
Cadillac ATS Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
6014430) - 2014 - CRC - 8/19/13
Seats and Restraints
3-7
Storing Memory Positions
To save positions to the
“
1
”
and
“
2
”
buttons:
1. Adjust the driver seat and
outside mirrors to the desired
driving positions.
2. Press and hold SET and
“
1
”
at
the same time until a beep
sounds.
3. Repeat Steps 1 and 2 for a
second driver using
“
2.
”
To save positions to the
B
(Exit)
button and Easy Exit features:
1. Adjust the driver seat and
outside mirrors to the desired
positions for getting out of the
vehicle.
2. Press and hold SET and
B
at
the same time until a beep
sounds.
Manually Recalling Memory
Positions
If the vehicle is off, or in ON/RUN/
START but not in P (Park) (or
parking brake is not set on a manual
transmission), press and hold "1,"
"2," or
B
to manually recall the
previously stored memory positions.
Releasing "1,
”
"2," or
B
before the
stored positions are reached stops
the recall.
If the vehicle is in ON/RUN/START
and in P (Park) (or parking brake is
set on a manual transmission),
press and release
“
1,
” “
2,
”
or
B
to
manually recall the previously
stored memory positions. Placing
the ignition in OFF before the stored
positions are reached stops the
recall.
If something has blocked the driver
seat while recalling a memory
position, the recall may stop.
Remove the obstruction; then press
and hold the appropriate manual
control for the memory item that is
not recalling for two seconds. Try
recalling the memory position again
by pressing the appropriate memory
button. If the memory position is still
not recalling, see your dealer for
service.
Automatically Recalling Memory
Positions (Auto Memory Recall)
The Auto (Automatic) Memory
Recall feature automatically recalls
the current driver
’
s previously stored
“
1
”
or
“
2
”
position when entering the
vehicle.
Depending upon the Auto Memory
Recall feature enabled in the vehicle
personalization menu, memory
“
1
”
or
“
2
”
positions are recalled in the
following ways:
To activate the recall when the
ignition is off, and On - Driver Door
Open is selected in the vehicle
personalization menu:
.
On vehicles with RKE, press
K
on the RKE transmitter and open
the door.