Cadillac 2014 Cadillac ATS, Руководство пользователя

Страница: 199 / 446

Black plate (27,1)
Cadillac ATS Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
6014430) - 2014 - CRC - 8/19/13
Infotainment System 7-27
Pairing a Phone
1. Press
g
. The system responds
“ Ready, ” followed by a tone.
2. Say “ Bluetooth. ”
3. Say “ Pair. ” The system responds
with instructions and a four-digit
Personal Identification Number
(PIN). The PIN is used in Step 5.
4. Start the pairing process on the
cell phone that you want to pair.
For help with this process, see
your cell phone manufacturer's
user guide.
5. Locate the device named “ Your
Vehicle ” in the list on the cell
phone. Follow the instructions
on the cell phone to enter the
PIN provided in Step 3. After the
PIN is successfully entered, the
system prompts you to provide a
name for the paired cell phone.
This name will be used to
indicate which phones are
paired and connected to the
vehicle. The system responds
with “ <Phone name> has been
successfully paired ” after the
pairing process is complete.
6. Repeat Steps 1 − 5 to pair
additional phones.
Listing All Paired and Connected
Phones
The system can list all cell phones
paired to it. If a paired cell phone is
also connected to the vehicle, the
system responds with
“ is connected ”
after that phone name.
1. Press
g
. The system responds
“ Ready, ” followed by a tone.
2. Say “ Bluetooth. ”
3. Say “ List. ”
Deleting a Paired Phone
If the phone name to delete is
unknown, see
“ Listing All Paired
and Connected Phones. ”
1. Press
g
. The system responds
“ Ready, ” followed by a tone.
2. Say “ Bluetooth. ”
3. Say “ Delete. ” The system asks
for which phone to delete.
4. Say the name of the phone to
delete.
Connecting to a Different Phone
To connect to a different cell phone,
the Bluetooth system looks for the
next available cell phone in the
order in which all available cell
phones were paired. This may need
to be repeated depending on how
many cell phones have been
connected.
1. Press
g
. The system responds
“ Ready, ” followed by a tone.
2. Say “ Bluetooth. ”
3. Say “ Change phone. ”
. If another cell phone is
found, the response will be
“ <Phone name> is now
connected. ”
. If another cell phone is not
found, the original phone
remains connected.